About Us

This is an introductory letter with the latest information about our facilities to all existing and proposed valuable customers. Emm Tech Calibration has submitted gratitude to our existing customers, with their support we have reached at this Position.

Emm Tech calibration has established in 2003 and entered in laboratory business. Emm Tech has honoured the Two Times National award by the Ministry of MSME. The symbol of quality services maintaining at all times. Emm Tech Calibration has its permanent facility for calibration & Testing and enjoying the accreditation as per ISO/IEC 17025-2017 as per the latest version. Our laboratory is open to others. Emm Tech Calibration has served thousands of customers.

Calibration: Emm Tech Calibration has known in calibration fields very well from the last many years. Emm Tech has covered Mechanical, Electrotechnical & Thermal Discipline (maximum scope) In Calibration discipline. For more details view Certificate No CC-2575 details.

Testing: With the feedback and support of our valued customers now Emm Tech Calibration has spread his wings in the fields of Testing. Most of the groups have covered in testing also. Emm Tech Calibration has accredited for Mechanical & Chemical Testing. The scope has covered to deliver the testing facilities Atmospheric Pollution, Pollution & Environment, Water, Metal & Alloys (Ferrous & Non-ferrous), Building Materials (Raw & Finished Items), Geotechnical Investigation, Soil & Rock testing. For more details view Certificate No TC-5498 details.

NDT Testing: Emm Tech is equipped with the latest NDT Instruments in-situ in concrete.(Rebound Hammer & UPV)

Consultancy: Emm Tech Calibration is in place to provide the consultancy services for the setup of new laboratory (Calibration & Testing) or the industry have the facility and planning to get the accreditation as per ISO/IEC 17025-2017. From scratch to accreditation grant. (Rajesh Deswal as certified LMS Consultant From QCI)

Training: Emm Tech Calibration has started the training sessions to meet the requirements for the industries. As we know that the standard ISO/IEC 17025-2005 has revised as new Version ISO/IEC 17025-2017. There are many updating as per new guidelines. Most of our customers are very experienced and knowledgeable, after that there is a requirement for continual improvement in the system. In some cases, there is an internal calibration requirement in the industries. There is some other information which requires to interact before placing the calibration/ testing work.

The Training categories are as under
  • Awareness Program as per ISO/IEC 17025:2017.
  • Uncertainty in Measurement.
  • Decision rule as per ISO/IEC 17025:2017.
  • General Information relevant to calibration/testing before commences the work.
  • Special session- on Hand Training for calibration/ Testing in any parameter (Practical & Theoretical). Which is covered in our scope only.

Internal Audit: If anyone wants to get the support for Internal audit as per ISO/IEC 17025-2017. We are here to serve you.

Supply of Instruments/ Gauges: Emm Tech Calibration is here to fulfil the requirement for instruments/ Scientific Instruments/gauges by selling, used in laboratories/ industries. AMC for force & Hardness machines with up-gradation facilities Please share your requirement, if any.

Emm Tech Calibration is using the web-based software for maintaining transparency, providing reminders of recalibration schedule before time, Information about the job booked for calibration/ testing, login access to valuable clients at our server to see the status of work and many others benefits.

Rest of above, the beauty of our the company, we welcome our customer to witness the test/ calibration with a prior information in writing, if anyone wishes.


At EmmTech, we work towards not only providing the best to our clients but we also try to improve each and every aspect of our organization, be it operations, research and development or management. Our goal is to provide one of the best calibration labs to our clients in the country. We look towards improving ourselves with each passing day.

We hope to provide a viable platform to measurement apparatus developers which they can resort to, when it comes to quality and accuracy check. We also work to improve the quality of our service by motivating our workforce to adapt and learn more and more.

We believe in the ideology of Mahatma Gandhi and wish to be a part of self dependent nation which has an affluent economy. As one of the leading calibration lab we not only wish to develop our organization but we also want an overall development of the measurement instrument industry. We believe that this industry has a lot of potential to generate employment in our country and thus we motivate our clients with lower yearly turn over to improve their quality and provide consultations to help them improve.


Our mission is to develop our organization by using the tools of innovation, hard work and team work and to focus on profitable growth driven by values. We are in constant pursuit to acquire operational excellence, superior customer services, innovation, quality and commitment. We are working towards providing our clients with economically efficient method to help them in improving their quality.

We never leave a stone unturned to serve our clients efficiently. This has given us a wide array of clientele. We strive to provide quality service consistently to all our clients.

We also value the time, skills, and expert opinions of our staff. We are committed to providing fair and living wages, reasonable, structured work schedules, and clear duties and spheres of rights and responsibilities for each team member. We do not expect staff to do work for which they are not trained; we do expect them to share their suggestions for improving any aspect of EmmTech working operations or care giving. We also maintain a friendly, fair, and creative work environment, which respects diversity, new ideas, and hard work.

Our policy

To serve our clients with a consistent streak of superior quality we abide by certain regulations that we have created. These regulations are inevitable part of our policy which ensures an ever evolving quality provision for our clients. Here are some salient features that relate to quality service provision:

  • We provide accurate calibration and testing services to our clients. We ensure that our observations and readings are errorless.
  • We work towards achieving international standards, recognition and reliability by implementing integrated management & technical requirement as per IS/ISO/IEC 17025-2005. We are accredited by NABL, a signatory to APLAC'S MRA as an accreditation body.
  • We use standard test methods and calibration methods and fulfill customer requirement. We also wish to achieve scientific excellence in the field to increase the research and innovation in the industry.
  • Our calibration and testing services are traceable to National/International standards.
  • Our laboratory is committed to maintaining global standards of operations by maintaining its accreditation through continuous up gradation of the required resources and support system.

Why Need Calibration?

Having instruments that are calibrated insures quality output products. Out of tolerance instruments tend to give wrong readings resulting in unnecessary back jobs and process failures. Bad or low quality products would pass as good ones resulting in warranty costs, and good products as non-conformance to quality ones, resulting to unnecessary reworks. So basically, calibration is all about producing high quality.

Assuming that you are asking why is there a need, the reason is simple. Every time a measurement is made or a process is performed, there is a measurement result and an expected result. Because of random and non-random variability, the measurement result usually differs from the expected result. Calibration works to either fix the non-random variability or account for it in such a way that the differences between the measurement and expected results are random and negligible. Often a calibration is used with a control scheme which monitors process variability and makes corrections or applies calibrations to ensure the quality of the product.

All equipment used for the production, development and test of product must be maintained and calibrated. The standard requires that measuring equipment be calibrated at routing intervals.

What is Calibration?

Calibration is a set of operation that establish under specified conditions, the relationship between values of quantities indicated by a measuring instrument or a system, or the values represented by material measure or a reference material, and the corresponding values realized by the standards with a evidence of traceability up to National /International standards.

Qualities determination of the error of measuring device and where necessary adjusting these errors to minimum.

Many people do a field comparison check of two meters, and call them "calibrated" if they give the same reading. This is not a calibration. It's simply a field check. It can show you if there's a problem, but it can't show you which meter is right. If both meters are out of calibration by the same amount and in the same direction, it won't show you anything. There is a requirement for calibration to use a reference standard having traceability up to National /International standards. For an effective calibration, the calibration standard must be more accurate than the instrument under test.